Motion Activated Bed Light, AINATU Night Light for Bedroom Light Flexible LED Strip Motion Sensor Bedside Light Strip with Automatic On/Off Timer( Warm Soft Glow)
Here’s What You Need With the smart sensor detecting both light and movement, illuminate the dark room when you get up and your foot touches the floor or Come nearby. Energy-Saving Lights up when and where you need it instead of always lighting up the entire room and disturbing others. Two modes:Daytime mode: Light control
Here’s What You Need
With the smart sensor detecting both light and movement, illuminate the dark room when you get up and your foot touches the floor or Come nearby.
Energy-Saving Lights up when and where you need it instead of always lighting up the entire room and disturbing others.
Daytime mode: Light control is off and the light is on when the person is sensed,Night mode: When the illumination
is less than 3lux, the light control functionis turned on, then it picks up you ,the light open ,and when you leave, the sensing
time ends, auto shut-off,further improve power efficiency and save energy.
Light Color:warm white
LED type :SMD2835
Strip light length:1.5M
Strip extension cable:1M
Luminous Flux:10-12LM/per LED
Power cable length:1.83M
Motion sensor:Day or Night mode
Continuous lighting time:15s-5min
The light strips are widely used in under bedside, baby room, kitchen, bathroom, cabinets
bookshelf, wardrobe and so on.
1.Clean the dust, Ensure the paste place under the bed frame is free from
dust before installation. to avoid falling off.
2.Remove the 3M adhesive backing on the strip.
3.Stick the bed light LED strips down the bed frame with the 3M adhesive tapes.
- Infrared Induction & Light Control: Now with our motion activated LED light, you can safely navigate across any room you install it, safely. No more bumping on furniture or searching for the light switches! As soon as you place your feet on the ground, the smart motion detector will light up, allowing you to see without being too bright or too dim.
- Motion Activated: Built-in human body passive infrared (PIR) motion sensor light with automatic shut-off timer. Automatic Turn on and Shut off by human induction in the dark environment. Inductive range: 3.6m (11.8feet), 140°. Motion sensor Auto shut-off timer can be set from 15 seconds to 5 minutes.. (You can set time of keep the light on.)
- Two modes: Motion sensor night light have two modes of day and night, Daytime mode the light control turn off, Night mode the light control turn on. Convenient for you to choose.
- EASY SET UP: Our smart night light kit, might be advanced technology, but it will take you only several minutes to set the whole thing up! Easy to read and follow instructions and 3M adhesive tape are already included to make your life easy.
- 3-Year Warranty: We ourselves are the manufacturer, quality assurance. We promise 10000 hours service life with 3-year warranty.